Brass Cotter Pin By Precision Industrial Components Pvt. Ltd.

Key Features The Brass cotter pins are manufactured as per international standards which is in full agreement in regards to dimensions with ISO 1234,Din 94, Indian Standard 549,BS 1574. The Methods Of Measurement :- 1. Normal length : the nominal length is the distance from underside of the eye to the extreme end of the short leg. 2. Nominal size: The nominal size is the diameter of the hole for the receiving the split pins. 3. The Dimensions and permissible tolerances on the dimensions is the indicated. 4. Material: unless otherwise specified, split pins shall be manufactured from half round brass wires 5. Finish: split pins shall be supplied with bright self-color finish unless otherwise specified by the purchaser. The end of each leg shall be beveled and shall be free from burrs 6. Designation: A split pin shall be designated by the nominal size, nominal length, the number of this standard and material (for other than steel only.) a. Example 1: a split of nominal seize 5, nominal length 50mm and made of steel shall be designated as : Split pin 5 X 50 IS : 549 b. Example 2: A split pin of nominal size 10, nominal length 80mm and made of brass shall be designated as: Split Pin 10 X 80 IS: 549 Brass. 7. Test: The samples selected for test, when cold shall permit half the length of the both the legs being best back through 180 and closed flat upon themselves without showing any sign of fracture.